Features
1.Compact and lightweight design
2.7" color TFT screen, folding 90 degrees
3.Built-in high dot matrix thermal printer with long life
4.A standard patient event marker and a clinical event marking button to mark clinical events separately.
5.Auto fetal movement are available.
6.Multi-crystals, wide beam forming, high sensitivity ultrasound transducer, low ultrasound power
7.AC or Li-ion battery
8.More than 12 hours data storage, which can be recalled and reprinted.
Technical Specifications
Fetal Heart Rate Multi-crystal,pulsed doppler,high sensitive
Transducer Strengh <5mW/cm2
Working frequency 1.0MHz
Signal processing special DSP system and mode recognization
Measurement range 50~210 bpm
Measurement range 0~100units
Battery working time 2 hours(no printer working)
Speaker 1W
Power Supply AC 220V±20%,50Hz or 8.4V Li-battery
Power consumption <20W
Working Environment Temperature: 10~40 ºC, RH: 10~80%
Transducer Acoustic Output Under the requirements laid down in IEC 1157, 1992, the peak negative acoustic pressure does not exceed 1Mpa. The output beam intensity does not exceed 20mW/cm2 and the spatial-peak temporal-ave rage intensity does not exceed 100mW/cm2
Dimension 295W×240D×73H×mm
Net weight 1.75kg
Standard: FHR, TOCO, FM
Optional: Twins,FAS(Fetal acoustic simulator)
